3.
Your Pocket PC turns on.
7.2
Restoring the Factory Default State
In some cases, you may need to restore your Pocket PC to the factory default
mple, you
should clear the
Clear
g all
les, system settings and additional programs you have installed, will be erased.
state by clearing the memory (RAM) from your Pocket PC. For exa
memory:
z
When your Pocket PC does not respond after being reset.
z
When you forget your password.
ing the memory means all data you have entered in RAM, includin
fi
NOTE:
The files stored in My Flash Disk will not be erased during the process.
Disconnec
1.
t all cables, including the AC charger, from your Pocket PC.
2.
Push the navi
position.
gation stick upward and slide the ON/OFF switch to the OFF
3.
avigation stick, slide the switch back to ON again.
4.
Your Pocket PC turns on and performs the initial start up. (See Section 1.2
for information.)
While holding the n
62
