16
Machine Overview
Replacing the HEPA filter;
replacing or cleaning the pre-filter
Pull latch “A” in order to unhook the vent
grid; at the same time, slide it
(in the direction shown by the arrow) so that
it comes free. The pre-filter is housed in the
air exhaust under the HEPA filter. Replace
the pre-filter or clean it, by washing it with
water; dry it and carefully replace it in its
housing. Assemble the HEPA filter and the
vent grid again, by sliding it all the way in
until you hear the latch snap into place.
(A)
Summary of Contents for V14 PRO
Page 1: ...Excellence Meets Clean User Manual 2 Motor Upright...
Page 4: ...4...
