Minuteman Pro Series Owner'S Manual Download Page 14

14

10

LIMITED PRODUCT WARRANTY

Para Systems Inc. (Para Systems) warrants this equipment, when properly applied

and operated within specified conditions, against faulty materials or workmanship for a

period of two years from the date of original purchase by the end user.  For equipment sites

within the United States and Canada,  this warranty covers repair or replacement of

defective equipment at the discretion of Para Systems.  Repair will be from the nearest

authorized service center.  Replacement parts and warranty labor will be borne by Para

Systems.  For equipment located outside of the United States and Canada, Para Systems

only covers faulty parts.  Para Systems products repaired or replaced pursuant to this

warranty shall be warranted for the unexpired portion of the warranty applying to the

original product. This warranty applies only to the original purchaser who must have

properly registered the product within 10 days of purchase.

The warranty shall be void if (a) the equipment is damaged by the customer, is

improperly used, is subjected to an adverse operating environment, or is operated outside

the limits of its electrical specifications; (b) the equipment is repaired or modified by anyone

other than Para Systems or Para Systems-approved personnel; or (c) has been used in a

manner contrary to the product’s operating manual or other written instructions.

Any technical advice furnished before or after delivery in regard to use or application

of Para Systems’s equipment is furnished without charge and on the basis that it represents

Para Systems’s best judgment under the circumstances, but it is used at the recipient’s sole

risk.

EXCEPT AS PROVIDED HEREIN, PARA SYSTEMS MAKES NO WARRANTIES, EX-

PRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE. Some states do not permit limitation of implied warranties;

therefore, the aforesaid limitation(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL PARA SYSTEMS BE LIABLE FOR

DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF

THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Specifically, Para Systems is not liable for any costs, such as lost profits or revenue, loss of

equipment, loss of use of equipment, loss of software, loss of data, cost of substitutes,

claims by third parties, or otherwise. The sole and exclusive remedy for breach of any

warranty, expressed or implied, concerning Para Systems’s products and the only obligation

of Para Systems hereunder, shall be the repair or replacement of defective equipment,

components, or parts; or, at Para Systems’s option, refund of the purchase price or

substitution with an equivalent replacement product. This warranty gives you specific legal

rights and you may also have other rights which vary from state to state.

Longer term and F.O.B. job site warranties are available at extra cost.  Contact Para

Systems (1-972-446-7363) for details.

LIMI

TED PRODUCT WARRANTY

English

Summary of Contents for Pro Series















Reviews: