background image

3

BASKET ASSEMBLY

1. Figure 1 below shows the basket assembly as removed from the carton.
2. Remove the rope clip from original shipping position and place in the center of the upper basket

frame, as shown.

3. Raise the upper basket frame until the sides are taut (figure 2).
4. Place the basket under the rope clip.  Push the rope clip down until the basket spring snaps into

the notch on the under side of the  basket frame.

5. Turn the rope clip until vertical (pointing down).  The basket is now ready to be placed into the

frame assembly.

BASKET FRAME ASSEMBLY

1. Lower the basket into the frame assembly.
2. Hold the pivot latch on the basket in the up position while placing the pivot rod into the top slot of

the pivot bracket.  The pivot latch should straddle the pivot bracket as shown.

3. Move the pivot latch forward over the pivot bracket to lock into position.
4. Basket is now secured.

NOTE:  The wind apron furnished with the unit is used to keep the sweepings in the basket on windy
days or when sweeping at a high speed.  The wind apron stretched across the basket and tied on
the basket frame at the top corners as shown above it with supplied bungee cords.

Summary of Contents for Parker TE9036















Reviews: