Minuteman MMS620V16PC6, User Manual

Page: 3 / 8

2
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important instructions that should be followed during the
installation and the operation of the Power Distribution Unit (PDU).
SAVE THESE INSTRUCTIONS
•
To ensure safety in all applications where a PDU is hardwired to the Electrical
Supply, ensure that a Qualified Service Personnel installs the system.
•
The PDU systems supplied with a power cord can be safely connected to the wall
outlet by the user.
•
Make sure that the AC Utility outlet is properly grounded.
•
Do not open the unit there are no serviceable parts inside. This will void the
warranty.
•
Do not try to repair the unit yourself, see Obtaining Service.
•
Please make sure that the input voltage of the PDU matches the supply voltage.
•
Use a certified input power cord with the correct plugs and sockets for the
appropriate voltage system.
•
Make sure the PDU is installed in the proper environment as specified. (0-40
°
C
and 0-90% non-condensing humidity)
•
Do not install the PDU in direct sunlight.
•
Install the PDU indoors as it is not designed for outdoor use.
•
This PDU supports electronic equipment in offices, telecommunications, process
control, medical, security, and IT applications.
•
This PDU is intended for use in a Controlled Environment.
•
Servicing of PDU must be performed by Qualified Service Personnel Only.
•
CAUTION – To reduce the risk of fire, connect only to a branch circuit with over
current protection in accordance with the National Electric Code, ANSI/NFPA 70
(3KVA)
•
CAUTION - Connect the PDU to a two pole, three wire grounding AC wall outlet.
The receptacle must be connected to the appropriate branch protection (circuit
breaker or fuse). Connection to any other type of receptacle may result in a
shock hazard and violate local electrical codes. Do not use extension cords,
adapter plugs, or surge strips.
•
CAUTION - To reduce the risk of electrical shock with the installation of this PDU
equipment and the connected equipment, the user must ensure that the
combined sum of the AC leakage current does not exceed 3.5mA.
•
CAUTION - To de-energize the outputs of the PDU: Disconnect the PDU from
the AC wall outlet.
Receiving Inspection
After removing your MINUTEMAN PDU from its carton, it should be inspected for
damage that may have occurred in shipping. Immediately notify the carrier and
place of purchase if any damage is found. Warranty claims for damage caused by
the carrier will not be honored. The packing materials that your PDU was shipped in
are carefully designed to minimize any shipping damage. In the unlikely case that the
PDU needs to be returned to MINUTEMAN, please use the original packing material.
Since MINUTEMAN is not responsible for shipping damage incurred when the
system is returned, the original packing material is inexpensive insurance.
PLEASE
SAVE THE PACKING MATERIALS!
En
g
lish
3
Para Systems Life Support Policy
As a general policy, Para Systems Inc. (Para Systems) does not recommend the use
of any of its products in life support applications where failure or malfunction of the
Para Systems product can be reasonably expected to cause failure of the life support
device or to significantly affect its safety or effectiveness. Para Systems does not
recommend the use of any of its products in direct patient care. Para Systems will
not knowingly sell its products for use in such applications unless it receives in writing
assurances satisfactory to Para Systems that (a) the risks of injury or damage have
been minimized, (b) the customer assumes all such risks, and (c) the liability of
Para Systems Inc. is adequately protected under the circumstances.
Chapter One: Introduction
Thank you for purchasing a MINUTEMAN Power Distribution Unit (PDU) product. It
has been designed and manufactured to provide many years of trouble free service.
Please read this manual before installing your MMPD or MMS Series, PDU models
MMPD615V12PC6, MMS620V16PC6, MMPD2020V60DCL as it provides important
information that should be followed during installation and operation of the PDU
allowing you to correctly set up your system for the maximum safety and performance.
Included is information on customer support and factory service if it is required. If
you experience a problem with the PDU please refer to the Troubleshooting guide in
this manual to correct the problem or collect enough information so that the
MINUTEMAN Technical Support Department can rapidly assist you.
Chapter Two: Introduction to the Front Panel
En
g
lish