4-4
4.3
START UP AND STOPPING OF
MACHINE
Start up
1.
Prepare the machine as envisaged in the previous
paragraph.
2.
Seat up on the machine seat (7, Figure 4-2).
3.
Turn the start up key (1, Figure 4-2) on “I”; wait a few
seconds until on the display (3) appears the machine-
is-ready caption (4) “READY”.
In the event that the start up key is turned (1,
Figure 4-2) without being seated on the seat, in the
display area (4) appears caption "SIT DOWN" and no
function of the machine is available.
When the display shows indications other than those
described, it is necessary to request action by the
Minuteman Assistance Service.
4.
Check the state of the battery charges by observing
the percent indication (5, Figure 4-2) and the graphic
indication (6).
If necessary proceed in charging the batteries; see
specific paragraph of chapter Maintenance.
5.
Go to the workplace, by starting up the machine with
the hands on the steering wheel and by pressing the
pedal (2, Figure 4-2).
The speed of moving is adjustable from zero to its
maximum set value, depending on the pressure
exerted on the pedal (2, Figure 4-2)
6.
If necessary, through the buttons (8, Figure 4-2)
adjust the capacity of the detergent solution (or water
for washing).
7.
(Optional) If necessary, through the buttons (9,
Figure 4-2) adjust the percentage of the detergent for
washing.
8.
If necessary, through the button (10, Figure 4-2)
adjust the maximum speed of the machine.
9.
To start washing the pavement, activate the disc
brush (or cylindrical brushes) through the button (11,
Figure 4-2).
10. To start drying of the pavement, activate suction
through the button (12, Figure 4-2).
11. To start both washing and drying of the pavement,
activate the button (13, Figure 4-2).
12. Start cleaning work by handling through the hands
the steering wheel (14, Figure 4-2) and by driving
forward the machine by pressing appropriately the
pedal (2).
Stopping the machine
13. Release the pedal (2, Figure 4-2).
14. Press the buttons (11, Figure 4-2) or (12) or (13,) to
deactivate and lift the respective active operations.
Suction stops a few seconds after activation of the
related button, for sucking all the water present in the
piping.
15. Turn the start up key (1, Figure 4-2) on “0”, and then
extract it.
16. If necessary, proceed with emptying the tanks,
operating as described in the specific paragraph.
ATTENTION!
Do not turn the start up key (1) without first
seating on the seat (7), since a safety system
consents use of the machine only when the
operator is seated on the machine seat (7).
It is absolutely forbidden to try to mishandle
the above-mentioned seat safety system, or
simulate in any way seating of the operator
on the seat.
ATTENTION!
The machine is not suitable to be used on
ruined, uneven floors.
ATTENTION!
Do not leave the machine unattended without
ascertaining that it does not move
autonomously.
Do not leave the machine unattended without
removing the start up key.
Summary of Contents for E Ride 21
