3
WARNING
This vacuum may contain potentially hazardous dust depending on its appilcation. Special
handling of contaminated disposal bags and filters is recommended. Disposal must be in
compliance with local EPA regulations
USER MAINTENANCE INSTRUCTIONS
All service and repair should be performed by qualified vacuum service representative or
electrician. No user serviceable components are employed in the electrical vacuum lid head
assembly. No lubrication of the motor is required.
CLOTH BAG & HOSE ASSEMBLY
Cloth bag and hose assembly are user maintenance items and can be replaced when worn
out. For optimum performance, empty and clean filter bag regularly. A clogged and dirty bag
restricts the flow of air and results in reduced vacuum. The hose assembly can be maintained
by wiping off with a dampened cloth of mild liquid soap and water, then allowed to dry.
CORD STORAGE
While not in use storage can be accomplished by winding cord around motor lid assembly.
Cord should be completely unwound from lid assembly during operation.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped into water, return to service center.
• Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around
sharp edges or corners. Do not run appliance over cord. Keep cord away from heated
surfaces.
• Do not unplug by pulling cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Always unplug the machine when removing the motor head off the tank.
This equipment should be stored indoors and not exposed to rain.
Always unplug the machine when removing the motor head off the tank. This equipment
should be stored indoors and not exposed to rain.
