minus40 MED230CLF Instruction Manual Download Page 3

MINUS

40

MINUS40 (PTY) Ltd Head Office: 8 Manhattan Street | Airport Industria Ext 2 | Western Cape 

Tel: +27 (0) 21 386 2290 | E-mail: [email protected]

MINUS40 MED230CLF Instruction Manual

Medical Freezer

CONDENSER CLEANING

Always follow these steps when cleaing the unit condenser.

Remember the Voltage Protector

The Refrigerator must always be connected to a voltage protector 
supplied. If neglected the warranty will be void.

   

Power off

Unplug the unit from the mains 
electricity supply.

 Remove 

the Grille

Remove the bottom grille with a 
screwdriver or Allen key.

CAUTION

: Some pipework & 

components might be hot

  

Locate 

Condenser

Locate the condensor next to, 
and attached to, the fan.
*It looks similar to a car radiator

 

Soft Brush

Take a soft brush and clean 
the fins. 
CAUTION: The condensor is 
very delicate

• 

Do not to bend the fins.

• 

Never poke anything 
through the fins

• 

Never use water

• 

Never use a hard brush

 

Vaccuum

If possible, use a vaccuum to 
clean away the debris.
Check the rest of the 
compartment for any foreign 
objects and remove.

 

Remove Tools

Ensure that all tools have been 
removed.

 

Voltage 

Protector

Plug the unit back in to the 
mains electricity supply. 
Ensure that the voltage 
protector is in use.
Listen to ensure the unit runs 
normally.

 

Log the Data

Log the date of the cleaning 
and make a dairy note to clean 
it again in 2 to 3 months

1

2

3

4

5

6

7

8

Why Clean the Condenser?

The function of the condenser is to dissipate the heat from within the 
fridge/freezer. By keeping the fins clear of dust, the unit will run more 
effectively with lower energy consumption and a longer product life.

Summary of Contents for MED230CLF

Page 1: ...ng or pipe work in the compressor compartment Position the unit out of direct sunlight and away from any other sources of heat The maximum ambient temperature in which the unit will function is 32 C The unit may not be built into a furnishing fixture or have its back to the wall The unit breaths through the grill and if blocked the unit will not operate properly damaging the compressor Ensure the ...

Page 2: ...g it in If you hear it running a problem is causing the compressor to overheat Check if the evaporator fan is running Listen if the compressor ever runs If not the compressor might be faulty Unit is not cold enough Check the temperature setting Assure that there is enough room for airflow in the fridge Check for airflow restrictions in front and at the back of the grille Clean the condenser coils ...

Page 3: ...a car radiator Soft Brush Take a soft brush and clean the fins CAUTION The condensor is very delicate Do not to bend the fins Never poke anything through the fins Never use water Never use a hard brush Vaccuum If possible use a vaccuum to clean away the debris Check the rest of the compartment for any foreign objects and remove Remove Tools Ensure that all tools have been removed Voltage Protector...

Page 4: ...ease indicate the DAYS that the condenser is cleaned on the chart Date cleaned marked with an X 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Clean the condenser with a soft brush Check the condenser monthly If there is dirt of fluff on the condenser clean as above Mark the chart above with a cross on the DAYS th...

Reviews: