CONNECTIONS
page11
SYSTEM CONNECTIONS
a. Using the antenna input:
Connect the antenna terminal from an antenna or cable/satellite
receiver to the antenna input terminal on the DTV-373-D; use the VIDEO button and
the / buttons to set the DTV-373-D's signal source to "Digital TV" or “Analog TV”.
b. Using the RCA Video/Audio input on the back:
Connect compatible AV equipment to the
DTV-373-D through the Composite Video and Audio input jacks on the back; use the VIDEO
button and the / buttons to set the DTV-373-D's signal source to "Composite 1".
c. Using the RCA Video/Audio input on the side:
Connect compatible AV equipment to the
DTV-373-D through the Composite Video and Audio input jacks on the side; use the VIDEO
button and the / buttons to set the DTV-373-D's signal source to "Composite 2".
d. Using the S-Video1 and RCA Audio input on the back:
Connect AV equipment to the DTV-
373-D through the S-Video and Audio input jacks on the back; use the VIDEO button and the
/ buttons to set the DTV-373-D’s signal source to “S-Video1”.
e. Using the S-Video2 and RCA Audio input on the side:
Connect AV equipment to the DTV-
373-D through the S-Video and Audio input jacks on the side; use the VIDEO button and the
/ buttons to set the DTV-373-D’s signal source to “S-Video2”.
f. Using the Component input:
The Component input may be used for Progressive scan or
HDTV inputs; use the VIDEO button and the / buttons to set the DTV-373-D's signal
source to "Component".
g. Using the HDMI1 connector:
Connect a PC computer to the DTV-373-D through the HDMI
socket on DTV-373-D. Use the VIDEO button and the / buttons to set the DTV-373-D’s
signal source to “HDMI1” .
h. Using the HDMI2 connector:
Connect a PC computer to the DTV-373-D through the HDMI
socket on DTV-373-D. Use the VIDEO button and the / buttons to set the DTV-373-D’s
signal source to “HDMI2” .
