minrray UV401, User Manual

Page: 22 / 37

- 21 -
9. Key Combination Function
[#] + [#] + [#]: Cancel all preset positions [#] + [#] + [0]: Switch to video format 4KP60
[*] + [#] + [6]: Restore factory defaults [#] + [#] + [1]: Switch to video format 4KP50
[*] + [#] + [3]: Set the menu language to Chinese [#] + [#] + [2]: Switch to video format 4KP30
[*] + [#] + [4]: Set menu language to English [#] + [#] + [3]: Switch to video format 4KP25
[*] + [#] + [9]: Switching between normal installation
and inverted installation [#] + [#] + [4]: Switch to video format 1080P60
[*] + [#] + Auto: Get into aging mode [#] + [#] + [5]: Switch to video format 1080P50
[#] + [*] + Auto: Stop aging mode [#] + [#] + [6]: Switch to video format 1080P30
[*] + [#] + Manual: Restore defaults of IP, user name
and password [#] + [#] + [7]: Switch to video format 1080P25
[#] + [#] + [8]: Switch to video format 720P60
[#] + [#] + [9]: Switch to video format 720P50
Note: If the previously used remote control address is not 1, but 2, 3 or 4;
the product address corresponding to remote control should be 1 after the restoration of factory
defaults;
At this point, the remote control address shall be changed back to 1, that is, the control functions
properly after [1] key of remote control is pressed.
3.3 Menu Description
Note: The parameter values changed in menu cannot be saved unless the user exits the menu and turn off
the power.
1) Menu Control Key
[Menu] key: Enter/exit the OSD menu or return to previous menu
[HOME]
key: Enter the next level of menu
[i] [U] keys: Select the control items
[
曰
] [-+] keys: Modify parameter values
2) Chinese Menu