18
WebCam
You can also use your DD200 as a WebCam for video confe-
rences. To do this please follow the instructions given below:
1. Press the Power On/Off button to switch on the DD200.
2. Actuate the Mode button 2 times to access the setup mode.
3. Using the
/T button (up) and the
/W button (down) you
can move around the menu selection. Select the function
"Web Cam" and confirm with the OK/Menu button.
4. Connect the camera to your computer using the USB cable.
5. Start a program that supports the WebCam mode (e.g.
Windows Net Meeting).
6. Follow the instructions provided by your software.
Note:
The video conference mode is only possible under Windows
and is not supported by MacOS. Before using the DD200 as
WebCam for the first time you must first install the WebCam
driver from the CD-ROM provided with the camera. To do
this, please follow the instructions given in Chapter "Instal-
ling the Software”.
Installing the Software
Contents of CD-ROM for the DD200
• DD200 Camera driver for
- Windows 98SE
- Mac OS 8.6 - 9.x
• WebCam driver for Windows 98SE/ME/2000/XP
• User manual as PDF
• Acrobat Reader
Computer system requirements
Prior to installing the software please check the computer
requirements given below to ensure that your computer is
compatible with the software provided.
Operating system
Windows 98SE/ME/2000/XP
Mac OS 8.6 - 9.x
CPU
Pentium Processor from
166 MHz or higher.
Apple Macintosh from
PowerMac G3, iMac, iBook.
RAM
32 MB RAM or higher
Available hard disk space 200 MB
USB interface
USB port
CD installation
CD-ROM drive
Monitor
16-Bit Color VGA Display
