Minox DC 1422, User Manual

Page: 22 / 44

EN-21
Taking images with Interval Capture mode
This mode is used to capture continuous images at a preselected time interval.
1. Press the
MODE button, and set the camera mode to [ ].
2. Press the MENU button, and select [Capture Md.] with the c / d buttons, and press
the SET button.
3. Select [Interval capture] with the e / f buttons, and press the SET button.
4. Press the MENU button, to exit from the [Capture] menu,
5. Press the d button and select the desired option item with the e / f buttons and
press the SET button.
„
Self-timer is disable in interval capture mode.
„ You can select desired option item from [10 Sec.] / [30 Sec.] / [5 Min.] / [30 Min.] /
[1 hr.].
6. Compose the image, and press the shutter button
down fully.
„ The camera will countdown from your
preselected time interval and take the first
picture.
„ The LCD display will turn off after 2 seconds to
save battery power.
„ The camera will continue to take images at the
preselected time interval, until:
a.
Pressing the shutter button again.
b. The memory card is full.
c. The battery is empty.
Setting the LOMO
Creates a lomo-like effect by adding over saturated colors, dark corners, and so on.
1. Press the
MODE button, and set the camera mode to [ ], and press the SET
button.
2. Select [LOMO] with the e / f / c / d buttons, and press the SET button.
3. Press the e button to select the desired option item with the e / f buttons and
press the SET button.
„ LOMO 1: Creates a typical LOMO effect.
„ LOMO 2: Creates a retro LOMO effect (more sepia tone).
„ LOMO 3: Creates a retro LOMO effect (greener tone).
„ LOMO 4: Creates a vivid LOMO effect.
4. Press the
d
button to exit.
00214 00214 00214