MINOURA RS-1100, Instruction Manual, Page: 5 / 6

- Page : 5 -
Then support the seat tube with Seat Tube
Support Bracket.
Adjust the position of the bracket not to pinch
the cable. The bike is supported safely .
(see Fig. 13)
Adjust the angle of Arm with Knob Bolt-B in
order to fit all contact points to the bike. Make
sure all contact points are supporting the bike
properly.
(see Fig. 14)
USE RS-1100 AS A DISPLAY STAND
Finally, sandwich the front wheel with both
Front Tire Supporters.
This device will make your bike stable and help
your work securely while the bike is on this
stand.
(see Fig. 14)
Place the RS-1100 on a flat and horizontal
floor.
Pull the Arm Stopper out fron the slot and lay it
down. (see Fig. 15)
Push the Lock Button of the Arm and fold down
the BB Support Bracket.
Then turn the Arm horizontally.
(see Fig. 16)
¶ RS-1100 also can be used as a display stand or temporary bike stand.
!
(Fig. 13)
(Fig. 14)
(Fig. 15)
(Fig. 16)