MINOURA LiveRide LR760 Instruction Manual Download Page 1

indoor bicycle trainer 

 

instructions manual

Contact

MINOURA North American Tech Center 

 

MINOURA Japan Headquraters

(for U.S. residents ONLY) 

    

(for ALL customers)

Hayward, California, U.S.A.   

 

 

 

1197-1 Godo, Anpachi, Gifu 503-2305 Japan

Phone: 1-510-538-8599  (8 am - 5 pm, Mon - Fri, PST) 

Phone: +81-584-27-3131

Fax: 

1-510-538-5899     Fax: 

 

+81-584-27-7505

Email: 

 

[email protected] 

   Email: 

 

[email protected]

        Web: 

 

www.minoura.jp

MADE IN JAPAN

If  you need help, please contact the shop first where you originally purchased this product 

or call the distributors in your country. The distributors list can be found on our web site.

When you cannot get enough service, you can contact us;

(ver.2.0 2015/7)

Applicable Tire Size Capacity:

 

any 24-inch – 700 x 40c

 

(ETRTO 42-622)

 

 

(Max Tire Outer Diameter = 712mm)

• The combination of the simple & durable mono-leg design frame and the powerful MagteqsTwin resistance unit

• Uses a pair of super-strong Neodymium magnets for providing extremely wide and controllable resistance range

• Compact round-knob design remote shifter enables to choose your desired power from 13 resistance levels easily

• Thick outer edge flywheel design generates more initial inertia through virtual weight of 2.7 kgs

• New double-thread knob type roller pressure system enables quick & easy setup/release operation

• Quick release type hub clamping mechanism

Main Features

Please Note

This trainer must be used with a completely smooth (no knobs or raised tread) tire. 

Failure to do so will ruin the mag unit, your tire, and void any possible warranty.

Summary of Contents for LiveRide LR760









Reviews: