background image

Important Notes

• For use with a normal 2-wheel bicycle only. Do not use a tandem, recumbent, track racer or 

other.

• The right side coupling has a black plastic cover (Grommet) in standard on LR340. This is for 

protecting the quick release skewer's nut from scratching, but if you use a bike with the nut 

type rear wheel axle, remove Grommet for better stability.

• Fits tire size between 24" and 700x45c (ETRTO 47-622). To use 24x1.75" or smaller tire, install 

the supplied Small Wheel Adaptor between the Mag unit and the base bracket. 29" tires may 

not be used on LR340.

• Some assembly required. Use correct tools (10mm spanner and M5 & M4 hex wrenches).

The kit contains only M5 hex wrench.

• Use the supplied rear quick release skewer for maximum stability. The hub clamping parts 

(couplings) fits the supplied quick release skewer only. Minoura is not responsible for any 

problem caused from using your own skewer.

• Use on flat and level floor or ground for your safety.

• Adjust the roller pressure to the rear tire properly in order to maximize your tire life.

Tire and roller contact will eventually wear both your tire and the trainer roller.

Wipe the tire surface to remove any solid dust away before setting the bike on the trainer in 

order to maximize the drive roller life.

• Check and adjust the remote shifter cable tension properly when you cannot set at L or H even 

though you turn the shifter lever.

• Touching the spinning wheel and/or any other moving parts while training may cause serious 

injury. Keep children and pets away from the trainer when in use.

• It is not possible to convert the remote controllable resistance unit to the non-remote version 

one. Removing the remote shifting device means fixing the resistance level at the highest 

range.

• If you feel any strange noise or smell, stop using LR340 immediately and contact the retailer 

where you purchased the trainer.

• To protect the floor or carpet from stain and sweat during workout, we recommend you to put 

a sheet or mat under the trainer and bike.

• Any warranty will be void if you use LR340 for other purpose than instructed.

Minorua offers 1-year limited warranty on this product from the date of your purchase for any 

problem caused by manufacturer's defect.

Any damage or problem caused by transporting process is not covered under warranty. Any 

damage from shipping or moving must be made to the shipping company.

Read the enclosed "Minoura Limited Warranty Policy" card for more detail.

For the latest information, refer Minoura web site (http://www.minourausa.com).

Please read carefully before use

- 2 -

Summary of Contents for LiveRide LR340









Reviews: