If you use a 22.2 mm bar, you must move the bolt from its factory D position, over one
notch to the C position (see diagram below).
NOTE: ONLY COMBINATION A-C WILL WORK IF YOU USE A 22.2 mm BAR. MAKE SURE
YOU CONFIGURE THE LEVEL-170 TO THE A-C POSITION. NO OTHER COMBINATION
WILL WORK FOR A 22.2 mm BAR.
(Fig. C)
A
B
C
D
15mm
10mm
2.
Before placing any bicycle on the stand, be sure that all legs are touching the
ground.
3.
To break the stand down, simply use your knee to kick up on the underside of the
LINK PLATE until the jaws let go of the bar. Repeat on the other side.
Using Your Own Bar
HINT
You can hook a wheel or a bag on the bar if you change the clmaping position of the
bar from the edge to any middle area.
For More Information
MINOURA JAPAN HEAD OFFICE
1197-1 Godo, Anpachi
Gifu 503-2305 JAPAN
phone (+81) 584-27-3131
fax (+81) 584-27-4258
Email: [email protected]
URL: http://www.minoura.co.jp
MINOURA NORTH AMERICA
37653 B Argyle Rd,
Fremont, CA 94536-4918 U.S.A.
phone 1-510-739-1395
fax 1-510-790-1108
Email: [email protected]
MADE IN JAPAN
Copyright © Minoura Co.,Ltd. , 2000
