S - Current Speed
0.0(3.0) to 65.9mile/h [27inch]
±
0.3 mile/h
The Current Speed is displayed on main display (upper line) and updated once a second.
O - Total Distance (Odometer)
0.0 to 99,999 mile
±
0.1 mile/h
Continuously measured unless all clear operation is done. At 10,000 miles(km), the increment becomes 1 mile(km). At
100,000 miles(km), it returns to zero and counting begins anew.
M - Maximum Speed
0.0(3.0) to 65.9mile/h
±
0.3 mile/h
With Reset operation, it returns to zero and counting begins anew.
A - Average Speed
0.0 to 65.9 mile/h
±
0.3 mile/h
The average speed from start to current point is displayed within 27 hours 46 minutes 39 seconds (99,999 seconds) or 999.99
miles (km). If either is exceeded, (.E) is displayed and calculation ceases.
D - Trip Distance
0.00 to 999.99 mile
±
0.01 mile
The trip distance from start to current point is displayed. With Reset operation, it returns to zero.
T - Elapsed Time
0:00'00" to 9:59'59"
±
0.003%
Elapsed time is measured from start to current point, in units of hours, minutes and seconds. At 10 hours, it returns to zero and
counting begins anew. With Reset operation, it returns to zero.
24-hour Clock
0:00' to 23:59'
±
0.003%
The Current Time is displayed as a 24-hour Clock on the sub-display.
Auto (Automatic Start/Stop) Function
The HyperBrain has an automatic Start/Stop function (Auto function). This Auto function switches on/off the unit to start or
stop automatically. You don't need to press the
Start/Stop
button each time when the Auto function is switched on.
To switch on/off the Auto function, set the main unit in the (T),(D), or (A) mode. Press the
Set
button and the Auto function
will be switched on/off each time the button is pressed. When the Auto function is switched on, the “AT” symbol appears.
Power Saving Function
When the main unit is left without receiving any input for 60-70 minutes continuously, the power will be automatically saved.
Then the main unit will display the clock time only. Press either the
Mode
button or
Start/Stop
button to release Power
Saving mode. (The Power Saving mode is automatically released when the main unit receives signal from the sensor.)
MEASURING AND DISPLAY FUNCTIONS
JAPAN HEAD OFFICE
1197-1 Godo, Anpachi, Gifu 503-2305 Japan
Phone (+81) 584-27-3131 / Fax (+81) 584-27-4258
Email : [email protected] / URL : http://www.minoura.jp
NORTH AMERICAN OFFICE
1996 East Avenue, Hayward, CA 94541-5454 U.S.A.
Phone 1-510-538-8599 / Fax 1-510-538-5899
Email : [email protected]
MADE IN JAPAN
