22
23
LOADING FILM
If 0 blinks in the data panel, press the film-chamber
release, open the chamber, then remove the film.
- If the film’s current VEI is
, insert a new roll of film.
- If a partially exposed roll of film was loaded into this
camera, the VEI has been changed from
to
.
- If a processed roll of film was loaded into this camera,
the VEI has been changed from
to
.
- If the film’s current VEI is
, remove the film, remove
and reinsert the battery, then reload the film. If the film
will not load, contact the nearest authorized Minolta
Service Facility.
4. Press the film-chamber door closed until it clicks.
• The data panel will display the cassette mark
and the film’s ISO, then the number of frames
remaining on the roll.
• After the film is loaded, the film chamber cannot be opened until the film has
been rewound.
• Film can be loaded when the camera is on or off. If film is loaded with the
camera off, all indicators in the data panel will disappear after the number of
frames remaining is displayed.
Summary of Contents for Vectis 300l
Page 1: ...INSTRUCTION MANUAL E ...
