Checking the battery power
The battery
checker is designed to check the
output
of the mercury battery.
By taking a few
seconds to check battery output
before starting
each new roll
of
film,
and particularly
when
using the camera after it has been stored for an
extended period
of time or a new battery
has
been inserted, you can avoid poor exposure due
to insufficient
electric power.
1. Turn the battery
switch on the base of the
camera to the ·'B.C."
position.
2.
If the indicator
needle points to the battery
check. mark
as shown
in the picture,
the
battery
can
be
regarded
as functioning
properly.
CAUTION:
• Do not leave switch
setting at battery
check
position
as the continuous
high battery drain
will
cause the battery
to go "dead"
in a few
hours.
All manuals and user guides at all-guides.com
all-guides.com
