Minolta Pi3505e, Service Manual

Page: 29 / 62

D-8
(6) Remove the Compact Flash card
1-2. Checking the assembly
(1) Checking the operation of the printer controller
Press the [Utility] key in the control panel, and then check that [Printer Settings] appears in
the lower-left corner of the Utility screen, appearing in the touch panel.
(2) Checking the operation of the network scan kit or Internet fax & network scan kit
Press the [Utility] key in the control panel, touch [Admin. Management] in the Utility screen,
appearing in the touch panel, and then touch [Admin. 2], then [Network Set], and check that
[DNS Settings] appears.
✽
When specifying network settings, the copier must be turned off, then on again.
3. Remove the power supply circuit board (4
screws).
4599U012AA
1. Remove the ROM cover on the right side of the
scanner.
C4514U011CA
2. Remove the Compact Flash card that is already
installed.
C4514U012CA