Minolta PageWorks 25, User Manual

Page: 37 / 317

2-2
Installation Precautions
S
e
tti
ng-Up
Cha
p
ter 2
Power Source
The following are the power source requirements for this printer.
• Power source: 120 V
±
10% at 60 Hz
±
3 Hz
• Voltage fluctuation: Within 120 V
±
10%
• Frequency fluctuation: Within
±
0.3%
Note
Grounding
Always ground the printer to guard against the danger of electrical
shock. To ground the printer, connect the grounding wire to the ground
terminal of the electrical outlet you are plugging in to or to a grounding
contact that complies with local electrical standards in your area.
Note
• Use a power source with minimal voltage and frequency fluctuation.
• Only use an outlet that is rated for the voltage capacity specified for
this printer.
• Be sure to plug the power cord all the way into the outlet. The outlet
should be located near the printer and easily accessible so you can
unplug the power cord immediately should any problem occur.
• Make sure the outlet you use is visible, and not hidden behind the
printer or any other object.
• If any other electrical equipment is plugged into the same outlet, make
sure that the capacity of the outlet is not exceeded.
• If you use an extension cord, make sure its capacity is greater than the
power consumption of the printer. Using an extension cord with a
lower capacity creates the danger of fire.
• Never use a multiple socket to connect other appliances or machines to
the same outlet being used to power the printer.
• Never connect the grounding wire to a gas pipe, the grounding wire for
a telephone, or to a water pipe.
25pw.book Page 2 Thursday, March 16, 2000 10:29 AM