UNINET IMAGING INC.
•
MINOLTA
®
MAGICOLOR 5430 CARTRIDGE REMANUFACTURING INSTRUCTIONS
29. Assemble the two halves by first inserting the drive gear.
30. Once that has been accomplished join the two halves and
insert the pin on the gear train side.
31. Install the developer roller drive gear and its appropriate
screw.
32. On the opposite side, install the support plate and fasten
with two screw as shown.
© 2007 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not guarantee or warrant downloaded information.
w w w.
u n i n e t
i m a g i n g . c o m / t e c h n i c a l . a s p
11124 Washington Blvd., Culver City, California USA 90232 • Ph +1 310 280 9620 • Fx +1 310 280 0533 • [email protected]
