Minolta Di200, Service Manual

Page: 104 / 199

FrameMaker Ver5.5E(PC) Di200/Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.01.26
S-25
(5) Function
• This function allows the Tech. Rep. to make the various function tests and adjustments.
Touch Panel
Display
Setting
Device Shows the numbers of prints for different applications. It also allows
the Tech. Rep. to clear each counter.
Maintenance Set different count values for the Maintenance Counter.
When the count reaches the preset value, the icon “ ” appears in
the Sub-Message Display.
<Procedure>
1. Touch “Maintenance (Set)”.
2. Press the Clear key to clear the current value.
Press the Interrupt key to undo the clearing operation, restoring
the original value.
3. Enter the value from the 10-Key Pad.
Touch Panel
Display
Setting
F1 <Paper Passage>
A check is made for paper passage performance.
<Procedure>
1. Select the paper source.
2. Press the Start key to start the paper passage cycle.
3. Press the Stop key to stop the paper passage cycle.
F2 This test is for factory adjustment only and should NOT be used.
F7-1 <Original Size Detecting Sensor Adjustment>
Automatically adjusts the threshold level of the Original Size Detect-
ing Sensor.
✽
For details, see DIS/REASSEMBLY, ADJUSTMENT.
F8 <ATDC Sensor Automatic Adjustment>
This test is for factory adjustment only and should NOT be used.
F12 <Test Pattern>
Outputs the test pattern.
<Procedure>
1. Select the paper source.
2. Press the Start key to start the output sequence.
3. Press the Stop key to stop the output sequence.
Display Description
Copier No. of prints made by copier
Printer No. of prints made by printer
Report Print No. of report prints made
FAX Print No. of fax prints made
FAX Transmission No. of prints made for fax transmission
Mail Transmission No. of prints made for mail transmission