Minolta DI1610F, User Manual

Page: 65 / 260

3 3.9 Loading Originals
3-32 Di1610f
B
e
fo
re
Ma
ki
ng
C
o
pi
es
Chap
ter
3
Placing the Original on the Original Glass
The method for positioning the original differs depending on the type of original
being used.
Precautions for Placing the Original on the Original Glass
Care should be taken when positioning the following types of originals.
An original of a nonstandard size:
G The document size cannot be detected automatically. Press the [Paper] key or
the [Zoom] key, and then select the desired paper size (p. 4-4) or zoom ratio
(p. 4-10).
A highly transparent original (OHP transparencies, translucent paper, etc.):
G Place a blank sheet of paper of the same size over the original (p. 3-34).
A book or other three-dimensional object:
G
Let the machine scan the contents of the original with the Original Cover or the
Auto Document Feeder raised. Do not attempt to push the Original Glass with
excessive force, as a malfunction could result. (The maximum load resistance
of the Original Glass is 3 kg.)
✎
Note
While scanning with the Auto Document Feeder or Original Cover open, do not
look directly at the bright light that may shine through the Original Glass.
Although the light that shines through the Original Glass is bright, it is not a laser
beam and, therefore, is not as dangerous.