Minolta DI1610F User Manual Download Page 85

Page: 85 / 260

4.3 Specifying the Zoom Ratio

4-10

Di1610f

ng Copi

apte

r 4

4.3

Specifying the Zoom Ratio

By specifying a zoom ratio, the copy can be enlarged or reduced.

Zoom Ratio Settings

Description

Fixed ratios

• The following optimum zoom ratios are available for making copies

from commonly used original sizes to standard paper sizes.

•

0.50

•

0.70 (A4

→

A5)

•

0.81 (B5

→

A5)

•

1.15 (B5

→

A4)

•

1.41 (A5

→

A4)

•

2.00

Ratios set using the Zoom [

▼

]

and [

▲

] keys

Touching the [

▼

] or [

▲

] key increases or decreases the zoom ratio in

0.01 increments.

The ratio can range from

0.50 to

2.00.

Full Size

This setting makes a copy the same size as the original (

1.00).

Summary of Contents for DI1610F





































































































































































































































































Search results

Summary of Contents for DI1610F

Reviews:

Brands by name

Popular brands

Minolta DI1610F, User Manual

Search results

Summary of Contents for DI1610F

Reviews:

Brands by name

Popular brands