Minolta CF911P Operator'S Manual Download Page 41

Page: 41 / 78

4-10

3. Server Setup Menu

Setup

Menu S

etting

r 4

Enable Printed Queue

Function:

The setting determines if the print queue is used.

Operation: Use the

▼

and

▲

keys to switch the Yes/No setting. Press the

Set

key to display the next

item

[Jobs to Save]

. If “No” is set,

[Save Change]

is displayed if the

Set

key is pressed.

[Save Change]

will be displayed if the

Cancel

key is pressed midway through the

process.

Jobs to Save

Function:

When the print queue is used, (the previous item

[Print Queue]

is set to “Yes”) the

number of jobs that are stored in the queue is set.

Operation: Use the

▼

and

▲

keys to switch the display of the numeric characters. Use the

key to shift the cursor (underlined section). Repeat this operation to set the number
of jobs.
After the setting is made, press the

Set

key to display

[Save Change]

. After the

setting is performed, press the

Set

key to display the following item,

[Save

Change]

[Save Change]

will be displayed if the

Cancel

key is pressed midway through the

process.

Save Change

Function:

This setting determines whether the conditions set in the Server Setup menu are
saved or not.

Operation: Use the

▼

and

▲

keys to switch the display of the numeric characters. If “Yes” is set

and the

Set

key is pressed, the changed settings are saved and the main menu display

returns. If “No” is set and the

Set

key is pressed, the changes in the settings are not

stored and the main menu display returns.

NOTE

Any Other Menu Setup Procedures
See Chapter 2 “Performing Setup from the Control Panel” in the Administrator Guide.

Enable Printed Q
Yes

Jobs to Save
10

▼

Save Changes
Yes

Summary of Contents for CF911P















































































Search results

Summary of Contents for CF911P

Reviews:

Related manuals for CF911P

Brands by name

Popular brands

Minolta CF911P, Operator'S Manual

Search results

Summary of Contents for CF911P

Reviews:

Related manuals for CF911P

Brands by name

Popular brands