E25
Adjusting Bounce Angle
An unsightly photo results when both direct light and bounced light
from the flash are used simultaneously.
Determine the bounce angle in reference to the distance to the
reflective surface, the distance from the camera to the subject, and
the focal length of the lens etc.
Focal length of lens
Bounce angle
70mm minimum
45°
28~70mm
60°
28mm maximum
75°, 90°
Correct
Incorrect
Determine the angle in
relation to the table at
right.
BOUNCE FLASH
E24
BOUNCE FLASH
• The bounce lamp glows on the control
panel.
• High-speed sync (p. 26) is cleared when employing bounce flash.
• Use a white ceiling or wall to reflect the flash. A colored surface may
color the light. High ceilings or highly reflective surfaces such as glass
are not recommended.
Rotate the flash towards the ceil-
ing.
•
The flash may be set to the following
angles: 45°, 60°, 75°, 90°.
3600HSD_E.qxd for final 00.10.3 12:01 Page E24
