MINOLTA-QMS PagePro 9100, User Manual

Page: 54 / 192

Introduction 48
Introduction
How do I handle the printer?
„
Do not open any cover of the printer during printing.
„
Handle the printer with care to preserve its life. Abuse may cause
damage.
„
Read all caution and warning labels carefully, making sure to follow any
instructions contained in them. These labels are located on the inside of
the printer.
„
Do not tilt the printer more than ±1% in any direction.
5 "
For best output quality and longest consumables life, keep the
printer on a hard, flat, level surface. A surface can be tested for
levelness with a standard round pencil. If the pencil rolls, the sur-
face is not level.
„
Do not oil, lubricate, or disassemble the printer.
„
Do not touch the transfer roller cartridge, electrical contacts, gears, or
laser beam devices. Doing so may damage the printer and cause the print
quality to deteriorate.
„
Do not place anything on the top of the printer.
„
Always close the printer covers gently.
„
Do not leave the printer’s cover open for any length of time, especially in
well-lit places; light may damage the toner cartridge.
„
Be careful when cleaning the inside or removing paper jams, as the fuser
and other internal parts may become very hot.
Attention
The fuser unit is hot. The fuser temperature drops gradually
(one hour wait time).
„
Do not cover the printer immediately after using it.
“How do I handle the printer?” page 48
“When does the printer need cleaning? page 49
“What cleaning materials should I use?” page 49
“How do I clean the media tray pickup rollers?” page 50
“How do I clean the multipurpose tray pickup rollers?” page 51