www.minniemobil.com
Seat/Back Pad - Attachment and Use
5
Fig. 7
Fig. 8
ATTACHMENT TO THE BACKREST
(To be done by your Service Dealer)
1. Disassemble the shell of the Backrest by removing the four screws that fix it (Fig. 7).
2. Place the Seat/Back Pad without pocket, with the narrower side of the trapeze
facing to the upper part of the Backrest (Fig. 8).
3. Introduce the 6 straps (3 at the front and 3 at the back) of the Seat/Back Pad through
the metal slots on the back of the backrest and fasten them with their Velcro strips
(Fig. 9).
4. To fix the Seat/Back Pad correctly in order to prevent it from slipping along the
Backrest, after all the straps are fastened, tighten them firmly by pulling them
again, one by one, thus readjusting the Velcro strips (Fig. 10).
5. Put the shell of the Backrest back into place.
Fig. 9
Fig. 10
x4
