10 |
©2016 Johnson Outdoors Marine Electronics, Inc.
INSTALLING THE RIPTIDE TERROVA
e. Make sure that the Power Cables from the
battery are disconnected, or that the breaker,
if equipped, is "off".
f. Place the mount as close to the centerline or
keel of the boat as possible. The motor can
be installed on either the Port or Starboard
side of the boat based on personal preference.
Check placement with the motor in the stowed
and deployed positions. Review the mounting
considerations at the beginning of the installation.
3
4
Deck of Boat
Keel
Power Cables
WARNING
Make sure the motor is mounted on a level surface and is
not connected to a power source.
c. Remove the Right Sideplate.
d. Swing the Left Sideplate out and away from the
Base Extrusion.
2
2c
2d
Right Sideplate
Left Sideplate
Base Extrusion
