MINN KOTA PRECISION MK 106PCL Owner'S Manual Download Page 51

 minnkotamotors.com  |  51  

©2021 Johnson Outdoors Marine Electronics, Inc.

MODE D’EMPLOI

SÉQUENCES DES DEL

CHARGE MULTI-PHASE

Chaque bloc possède les DEL suivantes :

Batteries au plomb (plomb-acide/AGM HP AGM) :

• 

25 %, 50 %, 75 % (JAUNE) - Ces DEL indiquent l’état  
d’avancement de la charge.

• 

100 % (VERTE) : Une DEL VERTE clignotante indique que  
la batterie est entièrement chargée, en mode de charge de  
maintien et prête à utiliser. Une DEL VERTE fixe indique que  
la batterie est entièrement chargée, en mode de charge  
de maintien à long terme et prête à utiliser.

• 

 

(ROUGE) - Une DEL ROUGE fixe   indique qu’il y a un problème avec une connexion. Une DEL ROUGE clignotante 

 

indique une 

erreur. Consulter les CONDITIONS D’ERREUR dans la section « Dépannage » de ce manuel.

Batteries au lithium :

• 

La DEL VERTE 100 % clignotera pour indiquer que le processus de charge est en cours et continuera jusqu’à ce que le processus soit terminé.

• 

Lorsque la DEL VERTE 100 % est fixe, le processus de charge est terminé et la batterie est prête à être utilisée.

BATTERY TYPE

  100%

  75% 

AGM/HP AGM

  50% 

FLOODED

  25% 

LITHIUM*

BATTERY SELECTION

CHARGE

  100%

  75% 

AGM/HP AGM

  50% 

FLOODED

  25% 

LITHIUM*

La charge multi-phase de Minn Kota fournit un profil de charge rapide et précis en contrôlant automatiquement le courant et la tension sans 
surcharger vos batteries.

Mode Pleine puissance

Durant cette phase, le chargeur livre un courant maximum jusqu’à ce que la batterie atteigne environ 75 % de sa charge. Lors de la charge 
de batteries au lithium, le chargeur restera en mode Pleine puissance jusqu’à la fin du processus.

Mode Absorption

Le courant de charge baisse alors que la tension de la batterie est maintenue constante. Consulter les informations du « Profil de charge » 
pour de plus amples précisions.

Mode Égalisation léger  

Le mode Égalisation léger est pour les batteries au plomb-acide seulement. La tension est augmentée automatiquement à chaque cycle de 
charge pendant un maximum de 1,5 heure afin de désulfater et de mélanger les fluides dans chaque batterie.

Mode Égalisation 

 

Le mode Égalisation est pour les batteries au plomb-acide seulement. Le mode Égalisation doit être sélectionné manuellement pour chaque bloc de 
batteries à égaliser. La tension est augmentée pendant un maximum de 4 heures afin de désulfater et de mélanger les fluides dans chaque batterie.

Mode Maintien

Lorsque la batterie atteint sa pleine charge, la tension du chargeur est réduite. Consulter le tableau « Profil de charge » dans la section 
Utilisation générale de ce manuel pour les tensions. Une DEL VERTE 100 % qui clignote est allumée pour chaque bloc afin d’indiquer 
que la batterie est chargée en mode Maintien de la charge à long terme et est prête à être utilisée. Les sorties du chargeur s’éteignent 
automatiquement après 24 heures et une DEL VERTE 100 % fixe s’allume pour chaque bloc afin d’indiquer que la batterie est prête à 
utiliser. Le chargeur se remet automatiquement en marche lorsque la tension de la batterie descend en dessous de 12,6 V.

Summary of Contents for PRECISION MK 106PCL

































































Reviews: