background image

2

1. SAFETY INFORMATION

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS!

This manual contains important safety and operating instructions applicable to the safe and efficient use of your Minn Kota battery charger.

The Minn Kota battery charger is a powerful electrical device.  If incorrectly installed, configured or operated, the battery charger can damage bat-

teries and / or electrical equipment.  Please read thoroughly the instructions and safety information contained in this manual before operating the 

battery charger.

Use of an attachment not recommended or sold by Johnson Outdoors Inc. may result in risk of fire, electric shock, or injury to persons or property.

The charger is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play 
with the charger.

Do not operate the battery charger with a damaged cord.

Do not operate the battery charger if it has received a sharp blow, been dropped or otherwise damaged in any way.

Do not disassemble the charger.  Incorrect reassembly may result in a risk of electric shock or fire.

To reduce the risk of shock or spark, never touch the ring terminals together while the charger is in operation.

External connections to the battery charger shall comply with the United States Coast Guard electrical regulations (33CFR183, Sub Part 1).

2. PERSONAL PRECAUTIONS

Consider having someone close enough nearby to come to your aid when you work near a lead acid battery.

Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing or eyes.

Wear complete eye protection and clothing protection.  Avoid touching eyes while working near battery.

If battery acid contacts skin or clothing, wash immediately with soap and water.  If acid enters eye, immediately flood eye with running cold water 

for at least 10 minutes and get medical attention immediately.

Never smoke or allow a spark or flame in vicinity of battery, engine, motor or other flammable or explosive equipment.

Be extra cautious to reduce risk of dropping a metal tool onto battery.  It might spark or short circuit battery or other electrical part that may cause 

explosion.

Remove personal metal items such as rings, bracelets, necklaces, and watches when working with a lead acid battery.  A lead acid battery can 

produce a short circuit current high enough to weld such items, causing severe burns.

Use the Minn Kota battery charger for charging and maintaining FLOODED / WET CELL, MAINTENANCE FREE, AND AGM / STARVED 

ELECTROLYTE batteries only.  It is not intended to supply power to low voltage electrical systems other than for charging and maintaining batter-

ies.  Do not use the charger for charging dry-cell batteries that are commonly used with home appliances.  These batteries may burst and cause 

injury to persons and damage to property.

NEVER charge a frozen battery. 

WARNING: RISK OF EXPLOSIVE GASES

WORKING IN THE VICINITY OF A LEAD ACID BATTERY IS DANGEROUS.  BATTERIES CONTAIN SULFURIC ACID AND PRODUCE 

EXPLOSIVE GASES.  A BATTERY EXPLOSION COULD RESULT IN LOSS OF EYESIGHT OR SERIOUS BURNS.  FOR THIS REASON, IT IS 

OF UTMOST IMPORTANCE THAT YOU FOLLOW THE INSTRUCTIONS EACH TIME YOU USE THE CHARGER.

TO REDUCE THE RISK OF BATTERY EXPLOSION, FOLLOW THESE INSTRUCTIONS AND THOSE PUBLISHED BY THE BATTERY 

MANUFACTURER FOR ANY EQUIPMENT YOU INTEND TO USE IN THE VICINITY OF THE BATTERY.  REVIEW CAUTIONARY MARKINGS 

ON THESE PRODUCTS AND ON ENGINE, MOTOR OR OTHER EQUIPMENT REQUIRING BATTERY USAGE.

Summary of Contents for MK-1-DC










Reviews: