MOUNT INSTALLATION
TOOLS AND RESOURCES REQUIRED:
• (2) 1/2” Wrenches
• Standard or Needle Nose Pliers
• A second person to help with the installation
INSTALLATION OF MOTOR TO MOUNT
1. With mount closed as shown below, use two 1/2” wrenches to remove one of the two nylock nuts and washers from the
upper pin and remove pin from mount.
NOTE:
The two bushings in the upper arm may come out. If so, keep them for re-assembly.
2. Using a pair of pliers, remove the spring clip on freshwater models (or the E-clip on saltwater models) from the lower pin and
remove lower pin from mount.
Upper Arm
Lower Aluminum Bracket/Arm
Upper Pin with
Nut and Washer
Bow Guard
Lower Pin
Lower Pin
Upper Pin with
Nut and Washer
Bushing
Spring Clip
Lower Aluminum Bracket/Arm
Upper Pin with
Nut and Washer
Bow Guard
Lower Pin
Upper Arm
