Minleaf ML-WT1, User Manual

Page: 4 / 8

SPECIFICATIONS
Model: ML-WT1
Power: 1000 W
Voltage: 12 V/24 V
Starting wind speed: 2.0 m/s
Rated wind speed: 13.0 m/s
Number of blades: 5
Generator type: Three-phase AC permanent magnet synchronous generator
Blade material: Nylon fiber
Host weight: 10.3 kg
INSTALLATION
1. Use 5 blade bolts to fix blade and hub.
2. Tighten blade bolts and nuts with the L wrench.
3. Connect 3 wires to the transmission cables; make sure they are long enough to be
pulled out from the bottom of the tower.
4. Attach the hoop on top of the tower and tighten the screws with an L wrench (not
included in the package)
5. Insert a nut into the hexagonal hole on the hub to fix the hub onto the generator;
tighten up by holding the wrench with your left hand and rotating the hub clockwise
with your right hand.
6. Tighten the cone onto the hub.
7. Connect the controller to a battery, then attach transmission cables from the
tower to the controller.
MAINTENANCE
1. Wind turbines are always exposed, regularly check if the turbine moves in the wind
and that the cables are connected. Use a telescope for extra visibility if required.
2.Timely inspection should be made after a heavy storm. If there is any damage, put
down the tower for maintenance. If mounted on a streetlight, an electrician should
safely climb the pole to check if the generator is not shortcircuited and is operating
properly.
3.Maintenance-free batteries should be kept clean.