minkaAire Mojo II, Instruction Manual Warranty Certificate

Page: 10 / 46

4
ELECTRICAL CONNECTIONS
REMEMBER to shut the power off at the circuit breaker or fuse
box.
Follow the steps below to connect the fan to your house supply wires.
Use the wire nuts supplied with your fan. Secure the wire nuts by
wrapping the connection with electrical tape.
Step 1. Connect the black (hot) wire from the ceiling to the black and
the blue wires from the fan. Connect the white (Neutral) wire
from the ceiling to the white wire from the fan. (Fig 2)
Step 2. If your outlet has a ground wire (Green or Bare Copper) connect
the fan ground wires ((from hanger ball and hanger bracket) to it;
otherwise connect the fan ground wire wires from the hanger ball
and hanger bracket together. (Fig. 2)
Step 3. Figure 3 & 4 Illustrate the wiring connections using optional
wall unit. (Available at your Minka-Aire® Retailer.)
NOTE: If a light kit is not included with your fan, one can be purchased
at your Minka-Aire®Retailer.
Fig. 2
BLACK
(
HOT
)
WALL
WHITE
(
NEUTRAL
)
GREEN
(
GROUND
)
CEILING
HOUSE WIRE SUPPLY
BLUE
(
OPTIONAL LIGHT
)
BLACK
(
MOTOR
)
WHITE
(
NEUTRAL
)
FAN CONTROLLED BY PULL CHAIN
,
LIGHT KIT CONTROLLED BY PULL CHAIN
.
GROUND
(
CONNECT TO GROUND WIRE ON
HANGER BRACKET IF NO HOUSE
GROUND WIRE EXISTS
.)