6
ELECTRICAL CONNECTIONS
WARNING:: To avoid possible electrical shock be sure electricity is turned off at the
main fuse or breaker box before wiring.
NOTE: The Aire Control
®
System is equipped with a learning frequency function which
has 32 code combinations to prevent potential interference from other remote units.
The frequency on your Receiver and Transmitter units have been preset at the factory.
(Fig. 12) No frequency change is necessary, should you desire to install another fan
within the same home or area with a seperate frequency code please see the "frequency
interference" troubleshooting section of this instruction manual to learn how to change
the frequency.
The “D (DIMMER)” selection is the light dimmable selection and is to be used with all
bulbs except for CFL bulbs. The “ON (ON/OFF)” selection is the light on only (no dimming
function) and is to be used with CFL bulbs as CFL bulbs cannot be dimmed properly.
FREQUENCY
Fig. 12
