9
Fig 19
INSTALLING THE LIGHT PLATE
NOTE: Before starting installation, make sure power is turned off at the circuit breaker.
1. Remove 1 of 3 screws from the light kit mounting plate and loosen the other 2 screws. (Do not
remove)
2. Raise and hold the light plate close to the light kit mounting plate and proceed to do the wire
connections. Connect the white wire connectors from the light plate and fan, follow the same
procedure with the black wire connectors. (Fig. 19)
3. Place the key holes from the light plate over the 2 screws previously loosened from the light kit
Mounting Plate, turn light plate until it locks in place at the narrow section of the key holes. Secure
by tightening the 2 screws previously loosened and the one previously removed. (Fig. 19).
LIGHT KIT
MOUNTING
PLATE
SCREWS
CONNECTORS
LIGHT PLATE
