Minka Group minkaAire ORB F623L, Instruction Manual, Page: 17 / 28

17
Step 2 .Remove one of three screws from the light kit plate and loosen,but
do not remove, the other two screws.(Fig.17)
Step 3 . Place the key holes from 16W LED assembly over the two screws
previously loosened from the light kit plate. Turn the 16W LED assembly
until it locks in place at the narrow section of the key holes. Secure by tightening
the two screws previously loosened and the one screw previously removed.(Fig.17)
LIGHT KIT PLATE
16W LED ASSEMBLY
WIRE CONNECTION
PLUGS
LED ASSEMBLY SCREW