Minka-Aire Mesa F565 Instruction Manual Download Page 10

O

PERATING YOUR

 F

AN

 

Restore power to ceiling fan and test for 

Restore power to ceiling fan and test for 

proper operation.

proper operation.

Speed  settings  for  warm or cool weather 

depend on factors such as the room size. 

Ceiling height, number of fans, etc.

The  Reverse  switch  is  located  on  the 

switch cup.   Slide  the   switch  to  the  Left  

for  warm weather  operation.  Slide  the 

switch to the Right for cool weather 

operation.

        

NOTE:

NOTE:  Wait  for  fan  to  stop  before  

changing  the setting of the slide switch.

Warm weather 

Warm weather - (Forward)

A downward airflow  creates   a  cooling  

effect  as shown  in  Fig. 1.  This  allows  you  

to  set  your  air conditioner  on  a  warmer  

setting  without  affecting your comfort. 

Cool weather

Cool weather - (Reverse)

An  upward  airflow  moves  warm  air off 

the ceiling area  as  shown in Fig. 2. This 

allows you to set your heating  unit  on  a  

cooler  setting  without  affecting your 

comfort. 

SUMMER OPERATION

WINTER OPERATION

The pull chain controls the fan speed as follows:

               1st pull         - High

               2nd pull      - Med.

               3rd pull        - Low

               4th pull        - Off

1

2

Summary of Contents for Mesa F565














Reviews: