Minix NEO X39, User Manual

Page: 12 / 53

NEO X39 connects to your TV or PC monitor via either a HDMI or
USB-C port.
Step 1: Connect the Cable [HDMI or/and USB-C]
Connect one end of the cable to the corresponding port on your
TV/PC monitor, and the other end to the port on NEO X39.
Step 2: Connect the Power
Connect the supplied 12V power adapter to the power-in jack.
Press and hold the power button for 2-3 seconds to power on,
the blue power LED should then glow.
Step 3: Turn on your TV/PC monitor and select the input
Turn on your TV or PC monitor and select the corresponding port
connected to the NEO X39.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could
void the user’s authority to operate the equipment under FCC rules.