MINIX
*;*86%
User's Manual
- 10 -
2.3.2 Installation of the CPU Cooler
)RUSURSHULQVWDOODWLRQSOHDVHNLQGO\UHIHUWRWKHLQVWUXFWLRQPDQXDOVRI\RXU&38&RROHU
2.4 Installation of Memory Modules
7KLVPDLQERDUGSURYLGHVWZRSLQ''5,,,'RXEOH'DWD5DWH62',00VORWVDQGVXSSRUWV
'XDO&KDQQHO0HPRU\7HFKQRORJ\)RUGXDOFKDQQHOFRQ¿JXUDWLRQ\RXDOZD\VQHHGWRLQVWDOOWZR
LGHQWLFDOWKHVDPHEUDQGVSHHGVL]HDQGFKLSW\SHPHPRU\PRGXOHVLQWKH''5,,,',00VORWV
to activate Dual Channel Memory Technology. Otherwise, it will operate at single channel mode.
To install system memory:
1. Power off the computer and unplug the AC power cord before
installing or removing memory modules.
2. Locate the DIMM slot on the board.
3. Insert the SODIMM module at a 45 degree angle.
4. Push the SODIMM module back towards theboard until the clips
lock the module in place.
5. To remove the DIMM modules, push the two ejector tabs on the
slot outward simultaneously, and then pull out the DIMM module.
Static electricity can damage the electronic components of the
FRPSXWHURURSWLRQDOERDUGV%HIRUHVWDUWLQJWKHVHSURFHGXUHV
ensure that you are discharged of static electricity by touching
DJURXQGHGPHWDOREMHFWEULHÀ\
We suggest there should be active cooling to the chipset area in order to let the motherboard
IXQFWLRQSURSHUO\FRPSOHWHO\HQFORVHGV\VWHPHQYLURQPHQWZLWKRXWDGHTXDWHDLUÀRZZLOOUHVXOW
in chipset overheat, which is not recommended.
1
2
3
4
