FCC Radiation Exposure Statement:
To comply with FCC RF exposure compliance requirements, the
antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or
transmitter.
Due to the used enclosure material, the product shall only be
connected to a USB Interface of version 2.0 or higher. The connection
to so called power USB is prohibited.
The suitable temperature for the equipment is 0~38℃.It is
recommended to charge the equipment in an environment with a
temperature that ranges from 0℃~27℃.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.
EU Regulatory Conformance:
Hereby, Hangzhou Miniwing Technology Co.,Ltd, declares that this
device is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Notice: Observe the national local regulations in the location where the
device is to be used. This device may be restricted for use in some or
all member states of the European Union (EU).
Quick-Start Guide
R100
① Do not expose to fire or high heat.
② Do not allow contact with water.
③ Do not place with sharp objects to avoid screen scratches.
④ Do not disassemble.
⑤ Use the charger according to public safety regulations.
⑥ The suitable temperature for the equipment is 0~38℃.
It is recommended to charge the equipment in an environment
with a temperature that ranges from 0℃~27℃.
6
Warning:
FCC Statements:
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Any changes or modifications not expressly approved by the
grantee of this device could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐ Connect the equipment into an outlet on a circuit different from that
to which thereceiver is connected.
‐ Consult the dealer or an experienced radio/TV technician for help.
