MWGAR/MWGARB User Manual
Version:
2.0
Refer to 4.12 What is Beacon Interval?
Data Rate
Select the transmission data rate from pull-down
menu. Data rate can be auto-select, 11M, 5.5M, 2M
or 1Mbps.
Preamble Type
Click to select the
Long Preamble
or
Short
Preamble
support on the wireless data packet
transmission.
Refer to 4.13 What is Preamble Type?
Broadcast SSID
Click to enable or disable the SSID broadcast
function.
Refer to 4.14 What is SSID Broadcast?
IAPP
Click to enable or disable the IAPP function.
Refer to 4.20 What is Inter-Access Point
Protocol(IAPP)?
802.11g Protection
Protect 802.11b user.
RF Output Power
To adjust transmission power level.
Turbo Mode
Click to enable/disable turbo mode.(
Only apply to
WLAN IC of Realtek
).
Apply Changes
Click the
Apply Changes
button to complete the
new configuration setting.
Reset
Click the
Reset
button to abort change and recover
the previous configuration setting.
20
MWGAR/MWGARB User Manual Copyright © 2006 Minitar Corporation
3.3.6 Wireless - Security Setup
This page allows you setup the wireless security. Turn on WEP, WPA,
WPA2 by using encryption keys could prevent any unauthorized access to
your wireless network.
