Minipa MTR-1522 Instruction Manual Download Page 19

Page: 19 / 20

A. Warranty Certificate Registration

The registration can be made by following ways:

- Mail: Send a copy of warranty certificate correctly filled

to the following address.

Minipa do Brasil Ltda.

Att: Serviço de Atendimento ao Cliente

Av. Carlos Liviero, 59 - Vila Liviero

CEP: 04186-100 - São Paulo - SP

- Fax: Send a copy of warranty certificate correctly filled

by fax number 0xx11-5071-2679.

- e-mail: Scanning this formand attach to your e-mail. Please

send to [email protected].

- Site: Register the warranty certificate by http:// www.minipa.

com.br/sac.

IMPORTANT

The warranty conditions and limitations will be valid only to

the certificates correctly registered. in case the purchaser

did not register, a sales receipt showing hte date of pur-

chase will be required.

Manual specifications.

Revision: 00

Dat of Issue: 25/03/2013

MINIPA DO BRASIL LTDA.

Av. Carlos Liviero, 59 - Vila Liviero

04186-100 - São Paulo - SP - Brasil

Summary of Contents for MTR-1522





















Search results

Summary of Contents for MTR-1522

Reviews:

Related manuals for MTR-1522

Brands by name

Popular brands

Minipa MTR-1522, Instruction Manual

Search results

Summary of Contents for MTR-1522

Reviews:

Related manuals for MTR-1522

Brands by name

Popular brands