72
5.1.3 DC Voltage Measurements
All pushbutton features are available for a standard DC volts reading.
5.1.4
Both AC and DC Voltage Measurements
When a DC volts function is selected, the meter can display the
combined AC + DC (RMS) value or AC and DC components of a signal
separately by using the On Screen Menu Selection button.
When the meter shows AC over DC (AC voltage in the primary display
and DC voltage in the secondary display), the other pushbutton functions
just except the RANGE button are not available.
Application : Using AC + DC and AC DC in Volts Mode
To take the combined AC+DC total RMS volts measurement, press the
menukey 4. In the above example the total RMS of 6.1188 V shows on
the primary display and the frequency of 60.00 Hz shows on the
secondary display.
