7.Connect the servos to a powered receiver. Bind the receiver with your transmitter to make the
servos arms return to their neutral point. Test whether the servos are working normally, and
install the servo arms according to the position shown in the pictur e.
Note: Please make sure that the servos have been tested and installed in strict accordance with
the following picture. After assembling the model, it will be not able to adjust.
8.Connect the cable of servos and motor, and connect the receiver to po wer for test. Ensure that
the servos and motor work normally and the motor rotation direction is correct.
Note: please install the propeller to check if the motor rotation direction is correct.
