Minimotors DUALTRON ULTRA II, User Manual

Page: 15 / 24

Dualtron Ultra II User Manual
PA
3
E Y E
PA
5
Km/h
SET
98
%
88
98
%
00 : 00 88888
Km/h
VOL
TRIP ODO DST TIME CHA
SET RPM OFF
PAS
Mp/h
8
[ M ]
⑥
⑦
⑨
①② ③④ ⑤
⑧
M
O
LED BAR funtions
7) Self-diagnosis through dashboard
Fault type Diagnosis Solution
System error
* If the error information
appears, immediately stop
using the product and take
the scooter to the service
center before use. Excessive
use can result in damage
to the product and safety
accidents.
Motor error
Accelerator error
Controller error
None
* The number is displayed when the cruise function is executed at a
constant speed.
* The number is displayed when the brake lever is operated. (When
the indicator lights, the accelerator does not operate.)
⑥
⑦ ⑨
①
②
③
④
⑤
⑧
⑥
⑦ ⑨
①
②
③
④
⑤
⑧
1) LED function guide
When the LED is turned on, the main power is turned on and the LED bar is lit
when the throttle power is turned on. Make sure that the LED lamp button on the
right side of the deck is turned on.
2) Remote control functions and settings
⑥
⑦ ⑨
①
②
③
④
⑤
⑧
⑥
⑦ ⑨
①
②
③
④
⑤
⑧
⑥
⑦ ⑨
①
②
③
④
⑤
⑧
⑥
⑦ ⑨
①
②
③
④
⑤
⑧
⑥
⑦ ⑨
①
②
③
④
⑤
⑧
The LED remote control is infrared.Please aim at
the bottom of the right LED bar.
W/WW
Flash
Jump
Jump
IC Set
CS
C3
C7
Auto
C16
Power but ton
Brightness&Light speed
Whole white lamp
&Number of lamp beads
control block
Light change mode
slection block
Multicolor light mode
selection block
Brightness&Light speed &Number of lamp beads control block:
Multicolor light mode selection block:
When single color light or whole white light is on, brighter/ darker; when the multicolor light is on, the light
runs faster/ the light runs slower. When you press”IC Set” button, you can choose how many lamp beads work.
Press “IC Set” button again to end the setting.
Tip
“C3”, 3 colors of light shine together;“C7”, 7 colors of light shine together;“C16”, 16 colors of light shine together;
“CS”, single color light shines.
15