background image

 

Lit
hiu

m

How to use a charger correctly

Safety precautions for Lithium battery

2)  Basic charging method     

*

 Failure of the charger and abnormal conditions can cause 

electric shock and fire. Learn the correct usage and prevent safety accidents in advance.

* Short-circuit Caution: 

Be careful not to short-circuit the battery because short-circuiting of the battery is very dangerous.

* Overcurrent Note: 

The battery of this product is designed to automatically shut off the 

                                      power supply to protect the battery when the over current is over 100A.

* Low Voltage Caution: 

The battery of this product is designed to be automatically shut off when 

                                           the voltage drops below 48V. Do not use the product in the low voltage state.

5. If the charger lamp does not light, 

charger fall, strong external 

shock, long time charge, or cable 

cover damage, discontinue use 

immediately and contact the service 

center.

6. Unplug the charger when you are away from 

the home for long periods of time.

1.Manufacturers and sellers are not 

responsible for any problems 

arising from any disassembly, 

modification, or mixing with other 

chargers.

2. The charger is forbidden to be used 

in places subject to high humidity, 

heat,  flammable  materials, 

confined spaces, or where there 

is no ventilation such as in a car.

3. The charger is not waterproof. It is 

thoroughly controlled to prevent 

moisture  from  entering  the 

charger.

4.Children and pets should not be 

allowed to approach the charger 

when they come into contact 

with them, as they may cause an 

electric shock.

7. Use only genuine charger.

8.Do not insert conductors into the charging port.

9. Do not touch the plug for about 10 seconds after unplugging the charger. There is a risk of 

electric shock from instantaneous discharge.

10. Do not remove the terminal during charging. Charge the internal circuit of the charger and 

cause malfunction.

11. Do not operate the product during charging.

12. Charging terminals should be firmly contacted during charging and should not be used if 

terminals are corroded or damaged.

13. When disconnecting the charger from the product, it is safe to hold the terminal without holding the wire.

1)  Basic charging method

1. Open the chargingport cap and connect 

it to the connector of the charger and 
connect it to the household outlet.

3. Be sure to close the chargingport cap when driving or storing except when charging.
4. When connecting the connector to the charging port, metallic sparks due to voltage 

difference may be splashed, but this is normal

1. Care  

 Lithium batteries should be protected from direct exposure to children and pets.

2. Performance 

 

 

Lithium battery is affected by external temperature. In winter, when 

the temperature is low, the performance of the battery is temporarily deteriorated and 

the mileage and power output is reduced. 

    

 

Lithium battery has a characteristic that discharge performance is reduced by more 

than 15% when charging / discharging 300 times or more. If usage time is shortened 

due to long usage, it should be replaced with a genuine one through the nearest point.

3. Charging

 

 Lithium battery should be used only with genuine battery and charger 

supplied from the manufacturer. Any problems caused by use of battery made by the manufacturer, 

mixed use, or using the charger are not covered by the manufacturer.

    

 Charging the lithium battery with a non-genuine charger may cause malfunction or fire.

   

 The lithium battery should be charged in a well-ventilated, dry place and around the charger in a 

place where there is no inflammable material.

   

 Lithium battery should be charged at 0 ~ 45 

 and discharged within -10 ~ 60 

. Charging or 

discharging at a temperature outside this range may cause malfunction, fire or explosion.

   

 In case of moving from cold outside to warm indoor, please charge it after 1 ~ 2 hours. This is to 

prevent condensation from occurring inside the product due to temperature difference.

4. Storage

 

 Lithium batteries should be kept away from snow, rain and direct sunlight. Do not store or 

charge them in a trunk or hot room. Select a dry place and store at room temperature (10 ~ 20 

).

    

 When storing for more than 3 months, charge the remaining battery level to 70 ~ 80% (do not 

store full charge).

5. Trouble symptom, safety

 

 Lithium battery should be discontinued immediately if it is damaged 

or leakage of battery, sour odor, appearance deformation, etc., and contact the place of purchase to 

get technical support and service.

   

 If overheat, smoke or ignition is detected in a product with lithium battery, immediately stop 

charging and use, move the product outdoors as soon as possible, and then use a fire extinguisher 

to evolve. Do not spray water or immerse the product in order to evolve, which is more dangerous.

   

 Lithium battery pack has very high energy density, so if you charge the battery for a long time 

in case of short-circuit, leakage, bad battery, etc., there is a possibility of ignition. Therefore, you 

should avoid charging for a long time without a person, and charging must be done while the person 

is aware that the risk of unexpected fire can be avoided.

6. MisuseIf 

the lithium battery is short-circuited or the polarity is changed, or if the battery is 

impacted, malfunction or fire may result. If you think that the battery has been impacted, you should 

stop charging and using it and visit the nearest point for inspection.

7. Water iBattery disassembly, modification and repair are not covered under warranty.

the lithium battery. There is a risk of fire or electric shock if the charger is connected while moisture 

is present.

8. Caution

 

Disconnect the battery from the main unit and prohibit recharging, reinstalling, or using 

other applications.

9. Disposal 

DisposalWhen disposing of the lithium battery, the battery should be separated from the 

product at the point of purchase or near the point so that the charge and discharge terminals are not 

short-circuited. Dispose of it as industrial waste when disposing of it.

Battery disassembly prohibited

Battery disassembly, modification and repair are not covered under warranty.

Warning

Caution

Danger

2. Charging status indicator         

(Red) Charging 

                          

(Green) Charging complete

16

 Dualtron Thunder II User Manual

 Dualtron Thunder II User Manual

17

Summary of Contents for DUALTRON THUNDER II














Reviews: