Minimotors DUALTRON mini, User Manual

Page: 15 / 24

The LED remote control is infrared.Please aim at
the bottom of the right LED bar.
Turn on the throttle power, and make sure the LED lamp
button on the left side of the deck is on.
W/WW
Flash
Jump
Jump
IC Set
CS
C3
C7
Auto
C16
Power but ton
Brightness&Light speed Whole white lamp
&Number of lamp beads
control block
Light change mode
slection block
Multicolor light mode
selection block
Brightness&Light speed &Number of lamp beads control block:
Multicolor light mode selection block:
When single color light or whole white light is on, brighter/ darker; when the multicolor light is on, the light
runs faster/ the light runs slower. When you press”IC Set” button, you can choose how many lamp beads work.
Press “IC Set” button again to end the setting.
Tip
“C3”, 3 colors of light shine together;“C7”, 7 colors of light shine together;“C16”, 16 colors of light shine together;
“CS”, single color light shines.
Remote receiver
The lights will only be
controlled
when you oprate
the remote
towards this place