background image

MINIMOTO

 HYBRID

ELECTRICAL HAZARD: 
WARNING

CAUTION!

THIS IS AN ELECTRICALLY OPERATED PROD-

UCT AND SHOULD BE OPERATED WITH CARE.

KEEP AWAY FROM SMALL CHILDREN.

BEFORE RIDING, ALWAYS MAKE SURE THAT

THE BATTERY RETAINER IS FIRMLY IN PLACE

AND HOLDING THE BATTERY SECURELY.

PREVENTING A FIRE:

a)

Never modify the electrical system or bat-

tery charger.  Modifications of these systems

can result in fire, serious injury and damage

to the electrical components.

b) 

To avoid damaging the battery, do not use

the charger if it has been struck, dropped or

damaged in any way.

c)

Do not expose the battery to high tempera-

tures as this may cause the battery to

explode.

d)

Never allow the battery charger to become

wet, and never place it in water.

e)

Use of the wrong type of battery or charger

could cause a fire or explosion resulting in

serious injury.

f)

Never use Minimoto™ parts, battery, or

components in any other products or vehicles

other than the MINIMOTO™ HYBRID.

Replacing or substituting parts with other

vehicles can result in overheating, fire, or

explosion. Only use MINIMOTO™ parts, bat-

tery or components in the MINIMOTO™

HYBRID because using or substituting other

parts can result in overheating, fire, explosion

or mechanical breakdown.

g)

The battery is to be handled by ADULTS

ONLY.  The battery is heavy and contains a

lead-acid electrolyte.  Dropping the battery

can result in serious injury.

h)

Never allow children to recharge the bat-

tery.  Charging the battery must be done by

ADULTS ONLY.  A child could be injured when

involved in the operations of battery charging

or use of electrical devices.

i)

Make sure that all battery contacts or con-

nectors are clean and free of excessive wear

or damage whenever the battery is charged.

If ANY damage is detected, DO NOT USE the

charger or battery until you have replaced the

worn or damaged part.

j)

Always remove the Key when your MINIMO-

TO™ is not in use to ensure the power is off.

Prevent any unauthorized riders from attempt-

ing to ride the bike.

6

Summary of Contents for Hybrid






























Reviews: